Commercial Automated Gates in Rochester, MN
Automated Gate Quality
American Fence Company of Minnesota, the top gate contractor in Rochester, collaborates with respected gate manufacturers such as HySecurity, Linear, and Liftmaster, to ensure that our automated gate products are of the highest quality.
You can use a keypad or remote to control who has access to your facility and when. This is an extra layer of security for your automated gate in Rochester.
With the proper access control device, it is incredibly easy to gain authorized entry with one of our automated gates. All it takes is the touch of a button or the simple process of driving a vehicle up to the gate.
American Access Company is a division of American Fence Company. We install thousands of automatic gates, gate operators, and automated gate systems across the country every year, and we are the number one gate contractor in the Rochester, Minnesota area. Following the leadership of expert gate installers, American Access Company also provides maintenance and automated gate repair to customers. Whether you have or need gate openers, automated gates, or automatic gate components, we are here to help.
AUTOMATED GATE INSTALLATION IN ROCHESTER
Modern gate operators are limited in autonomous function. No less than five different gate entry control devices are required for your automatic gate system. A combination of the following products is needed:
- Card readers
- Contact edges
- Ground loops and wands
- Photo eyes
- Photoelectric through beams
- Proximity readers
AUTOMATED GATE REPAIR IN ROCHESTER
In the past, a gate operator consisted of an electric motor, a gear reducer, a brake, a couple contacts, and ice cube relays. In those simpler times, gate repair in Rochester was pretty easy. These days, however, because modern gate operators consist of sophisticated pieces of machinery, there are multiple circuit boards, integrated safety devices, plug-in, and standalone components to take into consideration. The insides of these gate operators practically resemble personal computers.
Naturally, when you get an automatic gate, you want to make good on your investment. You want it to be long lasting. And for this, automated gate maintenance is necessary. To make sure your automatic gate lasts, you can take a few steps to keep it maintained through daily use and environmental conditions.
- Frequently clean your gate operator’s chain.
- Frequently grease and tension your automatic gate chain.
- As needed, inspect and adjust all moving components.
- Chain rollers
AUTOMATED GATE OPENER REPLACEMENT IN ROCHESTER
As our professional gate installers in Rochester could tell you, there’s a lot more to replacing a warn-out gate operator than simply installing a new unit. For one thing, you need to upgrade the entire automated gate system and all the gate safety devices. It is essential to ensure that everything integrates well with the new gate operator you’ve installed. It may sound confusing, but no worries. We are the number one gate contractor in Rochester and the Midwest, and our staff includes knowledgeable professionals who are passionate about their industry and who know gate technology in and out. They not only know modern gate brands, but older units as well. This is only natural, as we’ve been in this business for over fifty years. When it comes to gate technology in Rochester, there is no topping American Access Company.
Automated Gates in Rochester FAQ
Contact American Access Company today for professional assistance from automatic gate system specialists for an official diagnosis.
WHAT’S WRONG WITH MY AUTOMATED GATE?
Why is my automatic gate chain dragging, drooping and/or snapping?
If you are seeing these effects, then the chain is too loose. Tighten the tension of the chain at the chain tensioner devices at the end(s) of the chain. Often, these tensioners are fully engaged and links of the chain will need to be removed. A snapping chain may also set off the obstruction sensitivity indicator in the gate opener, putting the automatic gate in alarm mode.
Why is my gate operator not working but constantly beeping?
The gate operator might be in “alarm mode.” In other words, while the gate was in travel, one of the safety devices was tripped. Try resetting the gate opener at the circuit board or reset switch.
Why does my gate drop hard when it opens part way?
Likely, the gate rollers need to be adjusted. As the gate passes through the support posts, it shifts its weight from one set of rollers to the next, and if the rollers are not aligned correctly, this may result in the gate dropping or binding.
Why won’t my Rochester automatic gate open?
Check the gate operator for power. You will find a light or series of lights inside the cover, and these indicate whether the gate opener’s power is on. In most cases, there’ll be a manual switch to disconnect power. Make sure this switch is “on.”
- Check the circuit breaker to be sure it is not tripped. Every automatic gate should be on its own dedicated circuit.
- Remove any items that may be in the way of the path of the gate.
- If you have magnetic in-ground loops, make sure there is not a vehicle on or near the loops.
- If you have power at the gate operator, check the “presence” indicator lights on the circuit board or on independent devices placed wired in the operator to see if the operator safety devices are sensing something is blocking the travel of the gate.
- With photoelectric reflective and through beam type sensors, you may check to see if these devices are sensing a presence at the device as this equipment often has visible indicator lights.
Why does my automatic gate close part way and then open back up?
The gate’s photoelectric sensors or magnetic loop detectors may be being tripped. Check the circuit board or any safety devices in the operator cabinet while the gate is closing. Also, your gate chain may be too loose. Or maybe the gate is becoming bound in travel. While the gate is closing, check the circuit board to see if the obstruction sensitivity is tripped.
Why does my Rochester gate opener make a squealing sound?
Certain kinds of automated gate operators use belt drives for gear reduction. Over time, these belts tend to wear out and, eventually, they’ll need replacements. If a replacement’s not handled in a timely fashion, the gate may exhibit erratic behaviors such as starting and stopping as the belt engages and releases. Replace the belt if you notice this.
Another possibility is that the automatic gate may be binding against the rollers or internal trucks. Disconnect the power and then disengage the gate operator from the gate. Then, manually roll the gate open and closed. This will help identify binding or rough spots. The gate trucks, track or rollers may need to be replaced.
My automated gate motor is running but the gate is not moving
Your gate operator may be disengaged. To find out if this is the case, check inside the gate operator cabinet to see if the gate operator has a disengagement device. This will appear in the form of a lever. This lever disconnects the drive unit from the output. Before re-engaging the gate opener, check with others who may have disengaged it. There may be safety concerns.
Why isn’t my Rochester gate remote and/or gate keypad working?
When engaging your gate remote device or keypad, check the gate operator circuit board to see if it is registering an open command. If not, your remote may be in need of a new battery. If it’s not the remote battery, then the keypad or remote receiver may have become disconnected from the gate operator and you will need to check your wiring connections.
Why isn’t my Rochester gate stopping when cars are driving through?
Check your gate’s safety devices to be sure these are working correctly. While the gate is moving, cover the photoelectric detector or place a vehicle on the loop. Do not place anyone or anything in the path of the gate. The circuit board or independent safety devices placed inside the gate operator cabinet should indicate a presence. If not and the gate continues to move, elect to leave the gate in the full open or full closed position and disengage power at the gate operator and dedicated circuit breaker. The circuit breaker should also be “locked-out” as this represents a considerable safety hazard. Then contact an automatic gate specialist for further repairs.
Why does my Rochester gate begin to close and then stop?
Your gate may be tripping the magnetic loop detectors or photoelectric sensors. Some gate operators are programmed to simply stop when a safety device is tripped while the gate is traveling. Check the circuit board or any independent safety devices in the operator cabinet while the gate is closing to see if these devices are being tripped.
My Rochester gate motor is running but the automatic gate is not moving
The gate operator may be disengaged. Check inside the gate operator cabinet to see if the gate operator has a disengagement device. This will be in the form of a lever, which disconnects the drive unit from the output. Before re-engaging the gate opener, check with others who may have disengaged it. There may be safety concerns.
Why does my Rochester gate sound like it is binding when opening and closing?
The gate may be binding against the rollers or internal trucks. Disconnect the power and disengage the gate operator from the gate. Then manually roll the gate open and closed to identify any binding or rough spots. The gate track, trucks or rollers may need to be replaced.
Automated Gates in Rochester – Details
What devices open motorized gates in Rochester?
There are many options for opening your gate, which range from the simple to the sophisticated. If you have any questions, be sure to reach out to us, the number one gate company in Rochester. We can answer any questions you have and can also help you figure out which automated gate will work best for your commercial property.
Slide Gate Operators:
Slide gate operators are quintessential for motorizing a cantilever or overhead track gate. Be sure to take into consideration the type of gate, its length, its weight, and the cycles of its use. Slide gate operators come in various horsepower, voltages and phases. In cooperation with other access devices, it will provide security and convenience to your gate.
Swing Gate Operators:
These operators are perfect for opening and closing swing gates in Rochester, MN. Take into consideration the type of gate, its length, its weight, and its cycles of use. Swing gate operators are available in various horsepower, voltages and phases. In cooperation with other access devices, swing gate operators provide security, convenience and prestige to your residence.
Barrier Arm Operators:
Perfect for controlling traffic flow, barrier arm operators place vinyl or aluminum arms across the lane of traffic. The arm, which come in various lengths, can be easily raised or lowered with the use of various access devices. Take into consideration the width of your drive, frequency of use, voltage and phase when selecting your operator. If you have questions about which barrier arm length is right for your project, just reach out to us here at American Access Company, the choice gate company in Rochester, MN.
What types of systems control my Rochester gate?
Access control systems range from a single code, key, or card to a complete access control system independently controlling numerous gates and who can access them according to time, day and number of uses.
Access control systems for automated gates in Rochester, Minnesota can be organized into the following categories:
A standalone system controls a single gate. User additions or deletions must be done at each unit on an individual basis, usually through a ten-number keypad. The most popular applications for standalone gate systems in Rochester are in remote locations where cost is a prime concern. Most standalone systems provide limited access control such as time zones, but they lack in the powerful features and benefits found in other systems.
Programmable systems control multiple automated gates through master controllers, system hardware, phone lines, and personal computers. Controllers are located by each gate and wired together for data communications to a computer or modem. Each gate controller can be programmed so that users have defined levels of access according to day, time of day, holidays, hierarchy and other means. The controller stores users’ activities and can produce a report for managements review. Management makes changes to users through a computer connected directly to the access control system or remotely by an optional modem. The most common applications for programmable systems in Rochester are gated communities in Rochester, apartment complexes in Rochester, commercial and industrial facilities in Rochester, and single family homes in Rochester.
In most cases, the devices listed below will be available for both standalone and programmable systems.
What specific devices are available to control my gate?
Transmitters & Radio Receivers:
Similar to your garage door opener, this device can be located on your vehicle’s visor. All it takes is a push of the transmitter button, and a radio frequency code is sent. If the code is authorized, the gate will open. In most cases, a transmitter will open a closed gate or stop a closing gate before it is fully closed and then return it to the open position.
Most standalone transmitters employ mechanical dip switch technology. Rolling code technology is also available in standalone systems to prevent others from guessing your code. Programmable transmitters that integrate with a computerized controller allows you to provide individual codes to each transmitter. This allows you to track use and manage time zones.
In today’s newer automobiles, you have the option of a built in “Homelink” system. These systems will also work with your gate operator as well as your garage door opener.
With the use of a four or three digit code, you can operate your Rochester gate remotely from a weather-tight enclosed keypad on a goose neck stand (not included). Keypads are available with intercom features, a lighted background, and call button.
Standalone keypads have very limited users and capabilities. Programmable keypads are linked to a controller and your computer. Programmable units are available with an almost unlimited number of users. The individual simply types in a three to six digit code using keypad to enter your gate. Some keypads are equipped with a light that varies from red to green when a code is accepted. If the light remains red, the code is not an authorized code and the gate will remain closed.
Proximity & Card Readers:
Just like swiping your credit card at the grocery store, you can incorporate a card reader to open and close your gate. This unit will be located in a weather tight enclosure and attached to a gooseneck stand (not included). Simply swipe the card through the reader. These units often incorporate red and green lights to advise you if your card is a valued card capable of opening the gate. If valued, the reader will send a message to the gate to open or close.
A more user friendly type device is a proximity reader. The card is not swiped but simply waved in front of the reader. In this event, the card or the reader is less likely to wear and fail to read over time. A proximity reader is less sensitive as you only have to get the card close to the reader. Proximity readers also utilize key fobs which may be attached to a key chain and are about the size of pocket watch. More sophisticated readers provide greater range and flexibility where you can simple place a card up against your front windshield and drive slowly past the reader head, allowing the reader to read the card.
Standalone systems utilize a single card with the same identity. Programmable units allow you to provide a card to each user with its own individual identity thus tracking use of the card and controlling entry via time zones. From your home computer, these systems will also allow you to quickly remove a card’s authority to access the gate.
Telephone Entry Systems:
These systems are wired to an existing phone line or will require a dedicated line. When an individual approaches the gate, they will have the option of entering a code on the touch keypad and entering. If they do not have a code, they may simply press a “CALL” button. Once this button is pressed, a call is placed to the homeowner’s house phone. A call from the telephone entry will have a distinct ring. The homeowner may then pick-up the phone and carry-on a conversation with the individual at the gate. At some point, the home owner may press a button on their phone’s keypad that signals the gate to open.
Standalone systems are typical on residential applications where there is just one phone number to be dialed. With these systems, simply programming may be done at the unit or by phone.
Programmable systems provide users the ability to scroll a tenants’ list, find the tenant’s name and dial their three digit code on the keypad. If the tenant answers their residence phone, they may speak to the individual and provide access by simply touching a button on their phone. These systems come with several options, including: computerized programming via modem, time zones for activating specific keypad codes, full screen for viewing, scheduling automatic gate opening and closing cycles, etc.
What other devices may I need to operate my gate?
Loop Detectors & Loops:
These devices are perfect for detecting vehicle traffic while on top of the loop. Designed to open a closed gate, keep an open gate open or reverse a closing gate to full open; a loop detector will provide both safety and access for vehicles. Wired to the swing or slide gate operator, the detector can be adjusted for sensitivity and frequency. Loops (not included) are installed in the pavement below the vehicle and wired to the detector.
Designed for safety and security, a battery back-up can be installed in the operator to function when the power goes out. The back-up unit will sense the loss of power and respond with closing the gate (fail secure) or open the gate (fail safe). Larger systems will provide repeated but limited operation for opening and closing the gate after a loss of power.
Mount your keypad, card reader, or any other control device on this cantilevered stand, making it easier to approach and operate. The stand mounts to the concrete with the use of anchors (not included) or may be set in a concrete footing.
Three Button Stations:
The most simple means to remotely activate a gate operator, a three button station can be used to open, close or stop the gate. Weather enclosures sold separately, these devices are perfect for manually operating the gate while in view. These devices are available in a two and single button configuration.
Perfect for installation both inside and outside the gated area. Weather tight enclosure available, this device provides those with a key to open and close the gate.
For use on swing and slide gates, these devices can provide up to 1,300 pounds of holding force. Perfect for securing pedestrian gates in cooperation with other access control devices. Designed for outdoors use with various brackets for mounting.
To meet compliance with the UL325 Code, these devices are capable of detecting vehicle and pedestrian traffic, providing safety from injury. With a 30’ range, the cell will detect anything that crosses its path. Available in various voltages, this device is wired to the operator. When its path is broken, the cell will send a message to the operator. Power is necessary at one end of the opening to the detector while a reflector is installed at the other end.
To meet compliance with the UL325 Code, these devices are capable of detecting vehicle and pedestrian traffic, providing safety from injury. With a 75’ range, the infrared detectors will detect anything that crosses their path. Available in various voltages, a device at both end of the opening is wired for power and controls. When its path is broken, the detectors will send a message to the operator.
Seven day timer:
This device can be installed in your gate operator to open and close a gate at a specified time each day of the week. Wired to the operator, you may program the time for the gate to open and then close for a seven day cycle. This device should only be used in conjunction with pedestrian and vehicle safety devices.
How will my gate know when to close?
There are a number of options but the most common is to have the gate automatically close through the use of a timer to close. The timer is adjustable from just a few seconds to over a minute. The timer can be set from the time the gate is opened or from the time the car clears a certain point. These timers are included with the gate operator.
What prevents the gate from closing when something is in the way?
All motorized gates must be installed with safety devices that prevent property damage or injury in the event of an obstruction to the gate. All gate operators supplied by American Fence conform to industry standards regarding safety. In addition for full compliance we will install additional safety measure to help prevent injury or property damage.
What about safety?
Automated access controlled gates are now under the watchful eye of the United Laboratories.
What is UL?
Underwriters Laboratories, Inc., a not-for profit organization established in 1894, is self-described as “the leading third-party certification organization in the United States and the largest in North America.” UL’s primary stated mission is “to evaluate products in the interest of public safety.” Note that while UL declares it is the “leading” third-party certification organization, it is not the only one. There are other testing laboratories and certification organizations in the United States.
What is a UL Standard?
UL standards are voluntary standards that establish minimum requirements and are developed via an open, non-exclusionary process. “Voluntary” means that the standard has not been initiated through any government or similar regulatory agency mandate. “Minimum” means that the industry and those who developed the standard believe that the requirements should be met by all participants affected by the standard, and that more stringent provisions may be adopted by some in the industry. Finally, an “open, non-exclusionary process” indicates that any interested party can participate in the development of a UL standard. In addition, a number of UL standards have undergone a “canvass” (ballot) process in order to obtain recognition as American National Standards.
The purpose of this process is to gain a wider acceptance of a specific standard. The canvass process typically includes interested individuals and organizations that may have direct or material interest in a particular standard. UL 325 is one of the standards that have attained the ANSI (American National Standards Institute) designation.
What is the UL 325 Standard?
For products within the scope of the standard, UL 325:
- Contains the basic qualifying factors that products must meet in order to be documented (listed) and marked (labeled) as complying with the requirements of the UL 325 voluntary Listing and Labeling program.
- Provides methods for testing products, primarily related to safety performance.
- Covers installation of products in accordance with the National Electrical Code, which is maintained by the National Fire Protection Association (NFPA) and is in force nationwide. UL 325 is to be harmonized with this Code.
- Addresses safety concerning potential fire and electrical hazards, as well as the safety of the general public.
How is UL 325 Used?
UL 325 is used as a basis to test products at a nationally recognized testing laboratory. Gate operators that choose to participate in a listing and labeling program submit their products for testing. If they are found to be in compliance with the UL 325 standard, they are “Listed” and receive a “Mark.”
It is very important to remember two facts:
- There are laboratories other than UL that are capable of listing and labeling products. A “UL label” is not a generic term. For example, many people use “Kleenex” or “Band-Aids” as generic terms when in fact they are specific brand names. UL is a brand name, and “UL label” should not be used generically.
- Products are not approved by UL or other laboratories. Approval implies acceptance of responsibility for compliance with standards. This responsibility lies with the listing and labeling applicant and not with the laboratory. The burden of proof regarding data always lies with the manufacturer.
Development of UL 325
The first edition of UL 325 was released in 1973. That edition was primarily focused on the electric operation of garage doors and did not contain provisions for gates. After federal laws were enacted in the early 1990’s, citing the provisions of UL 325 as applicable to garage door operation, DASMA members of the gate operator industry initiated the inclusion of electric gate operator provisions in UL 325. Some government agencies and other interested groups have monitored the standard’s progress and have provided input on the final format of the provisions of the standard that relate to gate operators.
Overview of UL 325 and Gates – Highlights of UL 325 include the following:
- A glossary which defines each type of operator
- Different “classes” of gate operators
- Entrapment* protection criteria for each “class” of operator
- Entrapment* alarm criteria
- Requirements for gate construction and installation (for detailed requirements regarding construction, see ASTM F2200, Standard Specification for Automated Vehicular Gate Construction)
- Instructional requirements placing increased responsibility on installers
- *In the document, “entrapment” is defined as “the condition when an object is caught or held in a position that increases the risk of injury.”
|A key part of the UL 325 standard is a table (Table 31.1) that summarizes the entrapment device options for different classes of operators of the various types of gates included in the standard. Refer to the table as you read about the provisions that are described in the following sections. Usage class||Gate operator category|
|Horizontal slide, vertical lift, and vertical pivot||Swing and vertical barrier (arm)|
|Primary types||Secondary types||Primary types||Secondary types|
|Vehicular I and II||A||B1, B2, or D||A, or C||A, B1, B2, C, or D|
|Vehicular III||A, B1, or B2||A, B1, B2, D, or E||A, B1, B2, or C||A, B1, B2, C, D, or E|
|Vehicular IV||A, B1, B2, or D||A, B1, B2, D, or E||A, B1, B2, C, or D||A, B1, B2, C, D, or E|
Gate Definition and Types
UL 325 defines a gate as “a moving barrier such as a swinging, sliding, raising, lowering, rolling, or the like, barrier that is a stand-alone passage barrier or is that portion of a wall or fence system that controls entrance and/or egress by persons or vehicles and completes the perimeter of a defined area.” The main types of gate operators/systems addressed in UL 325 are barrier, vertical pivot gate, horizontal slide gate, swing gate and vertical slide gate. It is important to note that all gates included in UL 325 are defined as vehicular gates and NOT PEDESTRIAN GATES. Property owners are expected to provide a separate entrance for pedestrian access.
Gate Operator Classifications
Four distinct types of classifications have been established:
Class I: Residential usage, covering one to four single-family dwellings.
Class II: Commercial usage where general public access is expected; a common application would be a public parking lot entrance or gated community.
Class III: Industrial usage where limited access is expected; one example is a warehouse property entrance not intended to serve the general public.
Class IV: Restricted access; this includes applications such as a prison entrance that is monitored either in person or via closed circuitry.
UL 325 defines the allowable entrapment protection options for each class as follows:
- Each class must have primary and secondary entrapment provisions;
- Each class must have different types of protection for the different classes of operators as well as for the different categories of operators; and
- The same type of device cannot be used for both primary and secondary protection.
An exception to compliance with the provisions of Table 31.1 has also been noted in the standard. An operator considered exempt would require all of the following:
- Operates a vehicular barrier (arm) that is not intended to move toward a rigid object closer than 2 feet;
- Does not have a pinch point between moving parts by virtue of the operator’s design or complying installation; and
- Is not required to be provided with means to protect against entrapment.
Provisions of Note Regarding Gate Operators
We have identified the following notable provisions included in UL 325 that affect gate operators and related safety devices.
- Class I and Class II operators must have an audio alarm which shall function if 2 sequential activations of the entrapment protection device occur. The “2 sequential activations” is noteworthy in that it is hoped that “nuisance” alarms will be kept to a minimum while still enhancing safe operation.
- Class I and Class II slide gate operators shall not exceed a speed of 1 foot per second when the operator is pulling 75 pounds or more. Since both classes listed involve general public usage, this maximum established speed strikes a balance between any perceived security issue (a person immediately following the party controlling the gate) and any danger from a person being struck by a gate.
- A Type B1 or B2 device serving as a Primary Safety Device shall be monitored for the presence and correct operation of the device, including the wiring to it, at least once during each open and close cycle. This requirement is included because these types of safety devices are often used as backup safety devices.
- Manufacturers will be required to specify a brand and model number of external sensors compatible for connection to an operator. This provision arose from concern over the gate operator external devices acting in tandem as a system, with a fault rate of 6 failures in 1 million hours of use (which equates to 115 years of continuous operation).
- After sensing an obstruction, reversing must begin within 2 seconds. This requirement is intended to keep a person from being entrapped in a stationary position by the gate system. After the first contact the gate must reverse and travel a minimum of 2 inches. If there is a second contact, the gate must stop, and requires a wired device to reset the operator.
- After any obstruction reversal by either an A or B2 device, the timer-to-close is disabled until reset. Both A and B2 devices sense direct gate contact with an obstruction, and the devices must perform their intended function without interference from a timer-to-close action.
- Stop the gate upon sensing a second sequential obstruction, and then not operate until an intended hard wired input is received in most situations, depending upon the combination of types of primary and secondary entrapment protection devices that are used.. A person within the line of sight of the gate must see what has caused the second sequential obstruction and must resolve this obstruction before operating the gate.
- If a Type C device is chosen, swing gates must not exert more than 40 pounds of force after initial start-up. The reasoning here is similar to the reasoning given for the speed limitation for horizontal slide gates.
Effect on Installations
The new provisions will have several effects on gate and fence dealers:
- Gate and fence dealers should look for an indication of the Class of each operator, which will be specified by the gate operator manufacturer.]
- Fence dealer sales personnel must match the site application with the Class of operator. The gate operator manufacturer should be contacted if there is any question about the site application.
- Both primary and secondary safety devices must be provided and matched to both the operator and site conditions. Although the gate operator manufacturer will either provide or specify these devices, the gate/fence dealer should insure that they are installed and correctly matched. Any questions should again be directed to the gate operator manufacturer.
- Warning signs must be permanently affixed to the gate panel. UL 325 includes specific requirements on the format, content, and placement of these signs.
Factors Related to Gate Construction and Installation
Vehicular gate operators should ONLY be used on vehicular gates and never pedestrian gates.
Adequate clearance should be provided between a swinging gate and adjacent structures to reduce risk of entrapment.
A sliding gate should work smoothly with easy rolling/movement in both directions, prior to the installation of the operator.
Controls should be as far away from the gate as possible, at least 6 feet from the gate, to prevent “reach-through” occurrences.
Warning signs and placards must be installed and be visible in the area of the gate.
See DASMA TDS-370 for information about gate construction and ASTM F2200, Standard Specification for Automated Vehicular Gate Construction.
Device-Specific Installation Instructions
There are also specific installation requirements for certain types of entrapment protection devices. These specific requirements emphasize the care and attention that each device must be given prior to and during installation.
For gate operators utilizing non-contact sensor devices (Type B1), instructions should be consulted for placement for each application, care should be exercised to reduce the risk of nuisance tripping, and one or more of these devices must be installed where the risk of entrapment or obstruction exists.
For gate operators utilizing contact sensor devices (Type B2), several requirements are spelled out in UL 325.
One or more contact sensors shall be located at the leading edge, the trailing edge, and also post mounted both inside and outside of, a vehicular horizontal slide gate; at the bottom edge of a vehicular vertical slide gate; and at the entrapment point of a vehicular vertical pivot gate.
A wired contact sensor shall be located, and its wiring arranged, so that communication between sensor and gate operator is not subjected to mechanical damage. A wireless contact sensor shall be located where the transmission of the signals is not obstructed or impeded by building structures, natural landscaping or similar obstructions, and shall function under the intended end use conditions.
For gate operators utilizing a continuous pressure activating device (Type D), controls must be placed so that user has full view of the gate area when the gate is moving. A placard must be placed adjacent to the controls and no other activation device shall be connected. Most importantly, an automatic closing device shall not be employed.
Statements in Manufacturer’s Instructions Concerning Installation
Gate and fence dealers can expect to see in gate operator instructions the following statements:
- The operator must be appropriate for the construction of the gate and the usage class of the gate. The appropriate primary and secondary safety devices to be used are a major consideration to support this requirement.
- All openings of a horizontal slide gate, and the portion of the fence where the slide gate passes, must be guarded or screened. These specific requirements in UL 325 that govern this provision were developed to address “reach-through” occurrences. For example, slide gates must have a protective cover 48 inches in height extending from the bottom of the gate/fence panel.
- All exposed entrapment points must be eliminated or guarded. It is up to individual gate and fence dealers to identify these points on a product-by-product basis, or on a job-by-job basis.
- Guarding must be supplied for exposed rollers. Exposed rollers are regarded as potential pinch points
Interested in learning more about automated gate systems? Check out American Access Company, the number one gate contractor in Rochester, today!